- External Cables

- Internal Cables

- SCSI Cable Finder

- External Adapters

- Internal Adapters

- Further Info

- External Terminators

- Internal Terminators

- Further Info

- Backplates

Internal Terminators

Active Terminators Active Terminators are the most common type of terminator these days. They have a small voltage regulator which terminates the device at the correct volatge. If you're unsure whether you need an Active or Passive terminator you should go for an active terminator. These terminators are required for devices running at Ultra SCSI speeds, and are recommended for any Single Ended Device. View Active Terminators

Passive Terminators Passive Terminators are commonly used with differential or HVD devices, if you know you have a differential device then use a Passive Terminator. They are only really suitable for slow SCSI buses. View Passive Terminators

Pass-Through Terminators Pass-Through terminators are used when you do not have a terminated device at the end of your SCSI bus and do not have the option to terminate the bus anywhere else. A Pass-Through Terminator has two connectors, one to plug into the device and one to plug into the cable. Pass-Through terminators can also be used in the same way as non-pass-through terminators i.e. with only one end connected. View Pass-Through Terminators